Springfield Armory XD-M Elite 9mm Concealed Carry Pistol

The XD-M Elite is Springfield’s advanced handgun model that fires with strikers. It features Iron sights with a suppressor, an the slide stop is ambidextrous, with improved serrations and a 22+1 capacity magazine that is compact in size.

The XD-M Elite also sports an interchangeable backstrap featuring three different inserts. It allows the pistol to comfortably fit a wide variety of hand sizes.

Optical Sights

Springfield Armory has upgraded their line of popular polymer frames, striker-fired guns, to their XD Elite. This XD-M Elite pistol has the characteristics that shooters in competition want as part of a kit designed specifically for use in the field. The XD Elite has Match barrels with enhanced serrations, as well as it comes with the Match Enhanced Trigger Assembly.

The 3.8-inch barrel, made of hammer-forged match grade Melonite coating on the barrel enhances ballistic efficiency as the streamlined frame of the grip provides the concealability needed for everyday use. The combination of capacity and performance makes this an ideal EDC alternative.

In the box, the XD-M Elite is ready to go using any red dot scope you prefer. The angled portion of the dustcover of the frame has a section of Picatinny rail that enables you to mount tactical lights or lasers. This pistol can be used to back up your main weapon when the light has gone out or is hard to read.

This XD Elite model comes with every one of the traditional XD Elite functions, which include slide locks that are ambidextrous and a magazine release designed for those who are southpaws. Additionally, it has upgraded serrations on the slide to give you traction. The magazine well that is extended allows users to keep 22+1 rounds inside the magazine.

Similar to the rest of the XD M Elite family, this one is also compatible with ammunition that is +P compatible. However, the use of hot loads will damage key components more quickly when compared to conventional pressure ammunition.

The front and rear ambidextrous sights are among the greatest features on this firearm. It’s simple to operate to left-handed shooters or anyone else.

Alongside two magazines in the package with the set, you’ll also get one black carry case made of nylon and a flat basepad to substitute the fingerhooks. Front sight also be equipped with replacement fiber optics, which can be changed to green ones, if you’d like to. You’ll need to install the replacement rods yourself, as they don’t come equipped with tools or instruction.

Trigger Pull

In the past, If you wanted a fully-sized polymer striker-fired firearm within the United States, your choices were only that of the Big Three — Glock, Smith & Wesson M&P and the Springfield Armory XD. This has changed since more companies make these types of pistols, but for the XD model, this is the most popular that the brand has to offer.

The Elite comes with a number of advanced features that differentiate it from its predecessors, the XD and XD models, like the forged barrel with hammer and a chamber indicator at the rear of the slide that serves as both a visual and a tactile sign of the gun’s status. Reversible magwell extension along with a rear-mounted adjustable sight and front sights with red fiber optics round out the package. The Elite includes a bigger slide and barrel with a melonite finish that’s designed to deliver long life and improved accuracy.

Both XD and XD-M pistols have become famous for their smooth trigger pulls. This trigger pull is no different. It’s even a little crisper than the XD-M guns available at Springfield. If you shoot a lot or play in bowling-pin contests that’s great news. Springfield has an XDM extreme trigger kit the gun that will decrease its overtravel, takeup and reset.

In my testing on an Caldwell Matrix rest, the Elite’s three initial shots clipped the 1.1″ the aiming point at 25 yards. Two shots went into a 4 inch circle, and the final shot was not able to clear the mark. The accuracy is quite good in a firearm such size, particularly considering the age and eyes of this old guy. Federal’s 180gr. Trophy Bonded, a jacketed soft point load that has a velocity of 1,275 FPS and the equivalent of 650 ft.-lbs. of force at the muzzle.

The slide stop can be described as one lever that is bilateral. This can be nice for those who are left-handed but isn’t the same as other pistols that I have tried. Additionally, there’s a lot more force required for the release of the right-side lever than the left. With time, this could be smoothed out.

Accuracy

Springfield’s XD series of handguns fired by strikers has changed over time. In 2020, the current XD-M Elite Series was introduced. It features options such as interchangeable backstraps and a trigger that is good. This platform is also able to be used with optics. This model springfieldstore.com, the XD(M) Elite OPS is not a different model, offering a few key upgrades which make it a great choice to shoot IDPA or USPSA competitive shooting.

Match Enhanced Trigger Assembly, also known as META or short for “match-enhancing trigger assembly,” is among the improvements that could be built. It makes the top polymer pistol trigger on the market. Its flat trigger, with an integrated blade safety feature, a integrated stopper for overtravel, and integral blade safety improve trigger performance and decrease cycle time.

META also results in the shorter time to reset the trigger as well as more accurate performance. My five-shot group average was 4.3″ in the case of Federal Syntech 124gn targets to check the XD (M) elite OPS. If you consider this was shot by hand using a stainless steel bench rest and standard handgun magazines. It’s an incredible performance.

A further improvement is the slide release and the magazine release, both of which are adjustable. This makes it possible to make the XD(M) Elite OPS very user-friendly for both lefties and righties. You won’t have to break the grip in order to remove magazines. The angled slide serrations let you to operate the gun even when you have cold or wet hands and help prevent falling off of the firearm when recoiling.

In addition, the XD(M) Elite OPS comes equipped with a threaded, rounded muzzle that can be used with 1/2×28 pitch suppression. Thread protectors are installed by the manufacturer. supplied, which is easily removed to install a full variety of noise suppressors.

Springfield provides four mount plates which are number-coded so that it is easy for users to recognize they belong to. The mounting plates sit right on the gun and enable you to switch quickly between various red-dot sights without being required to pull off the slide springfieldstore.com.

The XD(M) Elite OPS has the standard 4.2-inch barrel that extends from on the side of the slide, but you are able to swap it out by one that is shorter if desired. The side of the muzzle features 1/2×28 pitch threads making it easy to mount an suppressor even when you’re in a position to compete.

Bottom Line

Gun makers are working hard to minimize the size and weight of guns concealed in carry, and still maintain their power. Springfield Armory’s XD-M Elite 9mm will fit into this mold. They have taken their popular XD line and added a 10-millimeter version that includes all the features people who carry guns want are interchangeable backstraps (this model has three) easily-to-operate controls as well as a reliable trigger within an optics-ready platform.

It is also equipped with a magwell funnel. XD-M Elite also comes with the “standard” magwell funnel that is specifically designed to aid in the channelization of your gun when you reload under pressure. Important to be aware of that when you are under stress, such as when you are in self-defense. This device also helps keep your magazine flush to the frame so it can be used quickly and easily when inserted.

The slide and magazine that are ambidextrous as well as ambidextrous release is another attribute I like about this model of the XD-M Elite. It makes it much more accessible for people with left hand to use this pistol, particularly when you’re wearing gloves. Springfield has also made sure the grip safety for this pistol was as easy to use as is possible. It has finger-friendly depressions located both side of the grip. This decreases the possibility of missing the safety on the slide while holding the pistol to fire.

The XD M Elite has an Enhanced META Trigger. It was specifically created for shooters looking to get maximum performance out of the handguns they own with striker firing. META’s internal stops for overtravel stop that the trigger travels too long, helping you to stay in control when competing.

When it comes to accuracy when it comes to accuracy, it is very accurate. XD-M Elite did very well during my tests. It fired four rounds into less than 30mm with an ammo weight of 124gn Federal Syntech ammo which is pretty impressive. One thing I did not observe was that it is a bit too wide to allow for a comfortable carrying concealed and also it’s a little heavy for some shooters.

The XD-M Elite is an extremely striking striker-fired gun that anybody who is looking to buy a concealed carry or range gun needs to consider. The XD M Elite is a striking fired handgun that has various features essential for any gun-loving person who would like to carry. It comes in two sizes. It also comes with a tactical version with a barrel threaded with an optics-ready slide.